Lexmark X463 Administrator's Manual page 11

Location
Select Network Folder or FTP, and then configure the selected destination.
Notes:
•
To use the LDAP features, the printer must be configured to use an LDAP server. For more information, see
"Configuring LDAP" on page 17.
•
For a list of protocols used or required by the application, see the Readme.
Network Folder
Use
Address
LDAP Path Attribute
Path Suffix
LDAP User ID Attribute Type the attribute for the User ID on the LDAP server. This setting will not be visible until something
Domain
WINS Server
Broadcast Address
FTP
Use
Address
Port
LDAP Path Attribute
Path Suffix
LDAP User ID Attribute Type the attribute for the User ID on the LDAP server. This setting will not be visible until something
Scan Settings
Adjust settings in this section to determine the default settings that will be used for each scan. Select the check box
next to a setting to allow users to change that setting when scanning a document. Clear the check box to prevent users
from changing the default settings when scanning a document.
Note: Some scan settings may not be available on certain devices or in certain situations. For a complete list of available
scan settings, see the documentation that came with your printer.
1
Select the radio button or use the drop down menu next to each setting to set the default value.
2
If you want to allow users to modify the default values from the printer, select the check box next to the appropriate
feature. If you want to prevent users from modifying the default settings, deselect the check box.
To
Type the server name or IP Address of the network folder in the \\server\share format.
Type the path attribute for the LDAP server.
Type the path suffix for the LDAP server.
is typed in the LDAP Path Attribute field.
Type the Windows domain for the destination if the destination resides within a different Windows
domain than the printer.
Type the WINS Server address if the printer has difficulty connecting with a network folder
destination.
Type the network Broadcast Address if the printer has difficulty connecting with a network folder
destination.
To
Type the server name or IP Address of the network folder in the \\server\share format.
Type the port number that the MFP uses to communicate with the FTP server.
Type the path attribute for the LDAP server.
Type the path suffix for the LDAP server.
is typed in the LDAP Path Attribute field.
Configuring the application
11