UP349BH (WDECT2300) ENG OM
If the battery pack is
completely drained,
the handset will not
beep when paging.
[ 22 ]
5/12/04
10:54 AM
Page 22
FIND HANDSET
To locate the handset, press
when the base is in standby mode. The handset beeps for
60 seconds, and "
" appears on the handset
display. To cancel paging, press any key on the handset or
on the base.
FLASH AND CALL WAITING
If you have Call Waiting service and a call waiting tone
sounds while you are on a call, press
the waiting call. There is a short pause, and then you will
hear the new caller. To return to the original caller, press
again.
on the base
to accept