Additional Information; Changing The Digital Security Code - Uniden WDECT 2300 Quick Start Manual

Hide thumbs Also See for WDECT 2300:

Table of Contents

UP349BH (WDECT2300) ENG OM

[ 36 ]

5/12/04

10:54 AM

Page 36

The digital security code is an identification code used to connect the handset and the

base unit. Normally, setting the code is not necessary. In the rare situation that you

suspect another cordless telephone is using the same security code, you can change

the code.

To change the digital security code:

1. Perform the "System Reset" menu options ("De-register the Handset" and

"Replacing the Base Setting") for the handset (see page 15).

2. To register the handset do the following steps:

1) Place the handset in the base.

2) Registration starts automatically.

While registering

3) When the registration is complete,

If the registration fails,

above again.

appears in the display.

appears in the display. Try the steps

Table of Contents