Table of Contents
Advertisement
Dect 1805 Qk 2/26/02 10:12 AM Page 14
When a Handset receives an incoming call press
The appropriate icon will remain illuminated for the duration of the call.
If the Handset is resting in the Base Station and the AutoTalk feature is enabled, simply
lifting the handset will connect the call.
If you have more than one handset registered on your Base Station, incoming external calls
can be transferred to another Handset.
After pressing
the call:
Press
When the other handset is answered you may speak to them first and then transfer the call
by pressing
If the other handset does not answer, Press
This telephone may not be compatible with all PABX Systems. Please contact your PABX
provider for information on transferring calls. However a common method of transferring
through a PABX is to press
If the call waiting tone sounds during a call:
Australia: Press
New Zealand: Press
Pressing the Page key on the Base Station will cause all handsets to ring for 30 seconds.
This may be useful if you wish to locate a missing handset.
Pressing the Page button again, or pressing
10
RECEIVING A CALL
CALL TRANSFER
to accept the call - inform the caller that you are about to transfer
then the number of the Handset to recieve the call.
int
.
An optional Dect handset is required for this feature.
CALL TRANSFER THROUGH A PABX
then the extension number you require followed by
CALL WAITING / FLASH
then
to switch between callers.
to switch between callers.
PAGE HANDSETS FROM THE BASE STATION
If the Base Station Page key is pressed for longer than 4 seconds, the
Base Station will enter the registration mode.
.
to return to the original caller.
int
on a handset, will stop the paging signal.
.
Advertisement
Table of Contents
