Table of Contents
Advertisement
Dect 1805 Qk 2/26/02 10:12 AM Page 13
In New Zealand
the Caller ID
dialing feature
is not available
on the Telecom
Network.
Last Number Redial Calls
The handset stores the last four numbers called.
Press
to display the last number called. Press
next number.
Press
to dial the displayed number.
Caller ID Dialing
(Not available on NZ Telecom Network)
The Caller ID Memory contains the telephone numbers of the last 25 calls made to the
Base Station. When a Caller ID telephone number is displayed, it can be dialled directly.
Press
(long press - greater than 2 seconds)
The CLI Store location is numbered from
most recent caller
will be displayed.
(01)
LOC
0 0 1 1 0 0 1 1 7 7 6 6 3 3 5 5 5 5 5 5 7 7 6 6 5 5
To cycle through the 25 locations, press the
Press
to call the number directly.
MAKING AN INTERNAL CALL
If you have more than one handset registered on your Base Station, then internal calls can
be made between the handsets.
Press
key.
int
Key in the number of the Handset to be called
If the called Handset accepts the call, the dialled Handset number stops flashing
and the connection will be made.
All Handsets
All Handsets currently registered with the Basestation can be called simultaneously although
only one may answer.
Press the
key.
int
Press the
to call all Handsets.
When a Handset accepts the call, the star symbol will be replaced with the Handset identity.
again to display the
On entry, the telephone number of the
01-24.
Key.
LOC
1 1
INT
to
.
1
6
9
Advertisement
Table of Contents
