Mounting The Telephone On A Wall; Setting The Handset Retainer; Mounting The Base On A Wall - Uniden XC 340 Operating Manual

Mounting
the Telephone on a Wall
The XC340 is designed
to be mounted directly on a wall.
Setting the Handset Retainer
1. Remove the Handset Retainer on the Base Unit by sliding it upward.
2. Flip the Retainer over so the tab is facing up.
3. Slide the Retainer back into the Base Unit.
~
I 1
I 1
1 1
+
~
+
[Q]
Mounting the Base On a Wall
To TELLINEJack
-11-
5 mm
To DC IN 9V
Input Jack
-r ~-----
100 mm
~
~
~__n-
@'
To Telephone Socket
1. Carefully select a location away from electrical cables, pipes, or other items
behind the mounting location that could cause a hazard when inserting
screws into the wall.
2. Insert two mounting screws 10cm apart vertically, allowing about 5mm
between the wall and screw heads for mounting the phone. Make sure
the screws are securely fastened, and that the wall material is capable for
supporting the weight of the Base Unit; otherwise, damage to the Base Unit
would result.
13