Installing Your Xc 340; Selecting The Installation Location; Connecting The Telephone Line - Uniden XC 340 Operating Manual

Installing Your
XC 340
,..--
Selecting the Installation Location
Select a location for the XC 340 to avoid excessive
heat
or hurnidity (as in a
kitchen or bathroom), The Base Unit of your XC 340 can be placed on a desk
or tab!etop near a standard 230/240V AC outlet and standard telephone line
socket, or mounted on a wall plate. Keep the Base Unit and Handset away from
sources of electrical noise, (motors, fluorescent lighting). Be sure there is
sufficient space to safely
extend
the Base Unit antenna fully.
Connecting the Telephone Li"e
Plug the telephone line cord from the Base Unit into a standard telephone
socket.
(Note:
If you do not have a telephone socket, contact Te/eeom for further
information)
CAUTION:
. Never install telephone wiring during a lightning storm.
. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
. Never touch uninsuiated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
11 Use caution when installing or modifYing telephone lines.
11
I