Table of Contents
Advertisement
When the TONE/PULSE switch on the Base Unit is in the
PULSE position, the TONE button allows tone dialing for
access to long distance services, etc. Also, use when storing
a mixed Tone/Pulse number. The TONE button counts as
one digit of the number.
Special memory locations for storing numbers. Press the
appropriate button to dial a number.
Use to page the Base Unit, or to receive a page from the
Base Unit, and to establish communication between the
Handset and Base Unit. Also, when a phone call is answered
at the Handset, use INT'C to place the call on hold and to
page the Base Unit to pick up the call.
This button has a dual function: (a) When making a call,
press to send a timed "hook-flash" on the telephone line for
accessing services such as call waiting, etc. (b) When the
telephone is not in use, press to select one type of the two
ringer tones.
CHANNEL
Button
Use to select one of 10 channels for the clearest operation.
(Note: Operates only when the phone is in use.)
(On the side of the Handset) Set the switch to "RING ON"
to enable ringing when a call is received. Set the switch to
"BATT SAVE" to save battery energy when the Handset is
not in use, and disable ringing at the Handset.
Use when storing numbers in memory, erasing numbers from
memory, and to dial a stored number.
This button has a dual function: It redials the last dialed number,
or inserts a pause within memory dialing sequences.
This button has a dual function: (a) When making a call,
press once to adjust the volume of the earpiece speaker
(loud or soft). (b) When the telephone is not in use, press
to select the Handset ringer volume (high or Iow).
TONE
Button
(Australian
Models only)
ONE-TOUCH
DIAL Buttons
INT'C Button
FLASH/R.
TONE Button
RING ON!
BATT SAVE
Switch
MEM Button
RDLlP Button
VOLUME!
A.VOL Button
9
I
Advertisement
Table of Contents
