Charging The Battery Pack; Low Battery Indicator; Cleaning The Battery Contacts - Uniden XC 340 Operating Manual

For australia and new zealand
Table of Contents

Advertisement

Charging
the Battery Pack
The rechargeable Nickel-Cadmium Battery Pack included with your XC 340 must
be charged for approximately 12-16 hours before using the phone for the first
time. Place the Handset on the Base Unit and make sure the CHARGE LED
lights. If the CHARGE LED does not light, check to see that the AC Adaptor is
plugged in and the wall outlet is switched on.
Low Battery Indicator
-
When the Battery Pack voltage level in the Handset is very Iow and needs to
be charged, the TALK/BA TT LOW LED flashes every
3
seconds. If this occurs
while you are on the phone, a short alert beep will also be heard. When this
happens, complete your call as early as possible, and return the Handset to
the Base Unit for charging. Once the battery is Iow, you will only be able to press
the TALK button to return the phone to Standby. Allow 12 to 16 hours without
any interruption for the handset to fully recharge.
Cleaning the Battery Contacts
To maintain a good charge condition, it is important to clean all 8 charge con-
tacts on the Handset and Base Unit about once a month. Use a pencil
eraser or other contact cleaner. Do not use any liquids or solvents.
I
CONTACTS
CONTACTS
IDIen
...........
...........
...........
...........
...........
...........
~....
...........
...........
CONTACTS
"WJ<
"'" -
GII. .
...,.....
CD
(jfci
@@@-
c1J-@(iJ--
@@)@)
1J@~
IN USE.
CHARGE.
IHT'COM
-.......
(
I
0.1
, . . -
----
......-
..- .....
CID eR) CID CID
CONTACTS
15

Advertisement

Table of Contents
loading

Table of Contents