Using The Default Setting Mode; Selecting An Instruction Sheet Language; Changing The Default Settings - Epson LQ-2070 User Manual

Using the Default Setting Mode

The default settings control many basic functions of the printer.
While you can control many of these functions through your
software or printer driver, you may sometimes need to change
a default setting from the printer's control panel through the
Default Setting mode.
To enter the Default Setting mode and change settings, hold down
the Condensed button while turning on the printer. The printer
prints an instruction sheet. Follow the instructions on this sheet
and in this section. The current setting for the printer are indicated
by an arrow on the instruction sheet.

Selecting an instruction sheet language

Follow these steps to select the language in which you want to
print the rest of the Default Setting mode instructions:
1. Press the Font button until the Font lights indicate the
language you want to select.
2. Press the Tear Off/Bin button to save your selection.
3. Press the Condensed button to print the instruction sheet.

Changing the default settings

Follow the steps below to select printer functions and change
settings. The available functions and settings are listed on the
instruction sheet and in the table on the next page.
1. Press the Font button until the Font lights indicate the item you
want to change.
2. Press the Tear Off/Bin button until the setting you want to use
for that function is indicated by the Tear Off/Bin and Pause
lights.
Using the Printer
3-7