Olympus CAMEDIA C-5060 wide zoom Reference Manual page 157

,,(
0"
Editing still pictures
5 Use the arrow pad, zoom lever and
control dial to decide the trimming
position and size.
• Press _<2_,(_) to seIect the trimming
frame, and turn the zoom lever toward W
or T to decide the trimming size
• Use the controI dial to select the height
and width of the trimming frame.
• 3:2 trimming size can be selected when
the size of the setected picture is 2592 x
1944, or 2592 x 1728.
6
Press
@.
• The trimmed picture is displayed for one
second.
7 Press @_ to select the card, then press @.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the
setting screen
8 Press ,_'_ to select OK, then
press _.
• The BUSY bar is displayed during
trimming. After the image is saved, the
camera returns to Step 3.
• The trimmed picture is stored as a
separate picture from the original
• If you want to trim the picture again, seIect
RESET and press _ and repeat the procedure from Step 5.
• To quit the trimming function, select CANCEL and press _.
,_ • Trimming is not possible in the following cases.
Movies, when there is insufficient memory space on the card,
Note or when the picture was taken with the record mode set to
ENLARGE SIZE
• It may not be possible to trim pictures taken with another camera.
• If a trimmed picture is printed out, it may appear grainy.
156