Olympus CAMEDIA C-5060 wide zoom Reference Manual page 154

Sound can be added to a stilI picture that you have already taken (This is
known as "after-recording" ) You can also re-record over the sound that has
already been recorded Total recording time per picture is approximately 4
seconds
1
Use the arrow pad to select the still
picture you want to add sound to.
2
In the top menu, select MODE
MENU _ PLAY _ _,
I£_' =How to use the menus" (P49)
_ophone
3
Press _ to display START,
4
Turn the camera microphone
toward the sound you want to
record and press O to start
recording.
• The BUSY bar is displayed during
recording.
Note
• To obtain the optimum sound, the microphone should be placed no
farther than 1 m (3.3 ft.) away from the subject.
• If you re-record the sound, the original sound is erased
• You may not be able to record sound when there is insufficient card
memory (the CARD FULL message is displayed)
• Sound recording may pick up camera noises, such as button
operation or shutter movement
• Once sound is added to a picture, it is not possible to erase only
the sound In this case, make a re-recording with silence.
ls3j