Olympus CAMEDIA C-5060 wide zoom Reference Manual page 153

Use the AV cable provided with the camera to play back recorded images on
your TV Both stilt pictures and movies can be ptayed back
"13
o=
[
1
Mode dial )_ r'_[_
Make sure that the TV and camera are turned off, Connect
the AIV OUT jack on the camera to the video input terminal
on the TV using the AV cable,
Connect to the TV's video input (yellow) __
and audio input (white) terminals.
AV cable _ _,._.._
AN OUT jack (MONO)
Turn the TV on and set it to the video input mode,
• For details of switching to video input, refer to your TV's instruction
manual
Set the mode dial to [] and turn the camera on.
• The last picture taken is displayed on the TV Use the arrow pad to
select the picture you want to display
• The close-up playback, index disptay, slideshow and other ptayback
functions can also be used on a TV screen.
T/ps= = = = = = = = = = = = = == = = = = = = = = = = = = = = == = =
• You are recommended to use the optional AC adapter when using
the camera with a TV
t'
Note
Make sure that the camera's video output signal type is the same
as the TV's video signal type. _'"VIDEO OUT - Selecting the
video signal type '_(P 194)
The camera's monitor turns off automatically when the AV cable is
connected to the camera
Be sure to use the AV cable provided to connect the camera to the TV.
The picture may appear off-center on the TV screen
When pictures are compressed in order to fit the entire picture on
the TV screen, a black frame appears around the picture. If the
picture is output to a video printer via the TV, the black frame may
be printed.
152