Olympus CAMEDIA C-5060 wide zoom Reference Manual page 101

Q.
<
&
o
Metering
Ex: When metering 2 points (pressing the AEL button twice)
The aperture and shutter speed as caIculated from the average values
obtained by metering at 2 points These values are recalculated every time
another metering point is added
The average for the 2
metering points. The
average is always •
shown at the center of
the bar
The reading when the AEL button
was pressed O indicates the
number of times you have pressed
the button 'O indicates the
difference between the metered and
average readings
Wher _ moves more than ±3 from the center ofth_
reading), red <] _ appear.
Indicates how much
the present exposure
you are metering
differs from the
average exposure
value The present
exposure call be
fixed by pressing the
shutter button
halfway.
(The present
exposure is not
added to the average
value unless you
press the AEL
button.)
bar (the average
TIPS.. = = = = = = = = = = = = = =.. = = = = = = = = = = = = = = =.
To save the locked multi-metering exposure after shooting (AE
memory)
> After metering in Step 2, hotd down the AEL button for more than
1 second _ appears. While _ is displayed, the exposure is
saved. Press the AEL button again to cancel the AE memory.
The multi-metering exposure is canceled.
,', If you operate any of tile buttons or the mode dial after metering in
Step 2, the multi-metering exposure is canceled
100