Grandstream Networks HT701 User Manual page 14

DHCP Server/Client
Telnet Server
Fax over Ip
QoS
Transport Protocol
DTMF Method
IP Signaling
Provisioning
Control
Device Management
Dial Plan
Caller ID
Call Handling
Features
FIRMWARE VERSION 1.0.3.1
synchronization), AGC (automatic gain control), Status output, Decoder controlling via voice
packet header
Yes, DHCP Client only
Yes
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-
through, Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay
Diffserve, TOS, 802.1 P/Q VLAN tagging
RTP/RTCP
Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or SIP Info
SIP (RFC 3261)
TFTP, HTTP, HTTPS, TR-069, XML
TLS/SIPS , SIP over TCP/TLS
Web interface or via secure encrypted AES or non-encrypted central configuration file for
mass deployment using Grandstream binary file or xml format. Auto/manual provisioning
system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT. Syslog support. Full support of TR-069 management protocol
and Telnet access.
Yes
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold,
forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return service
HT70X USER MANUAL Page 14 of 52