Brother PE-DESIGN 7.0 Quick Reference Manual page 22

Type in the 15-digit product ID on the label at-
tached to the CD-ROM case, and then click Next.
→ The entered product ID and the serial number auto-
matically retrieved from the USB card writer module is
displayed.
Click Next to access our server through the
Internet and retrieve the upgrade key.
→ If the upgrade key has been successfully retrieved, the
dialog box shown below appears.
20
Click Next to begin upgrading the USB card
writer module.
Note:
• If the product ID is incorrectly en-
tered, the message "The product ID
is incorrect. Check that a mistake
was not made during typing." ap-
pears.
• The uppercase letters "I" and "O"
are not used in the product ID.
Note:
• If a fi rewall is being used, set it so
that the Internet can temporarily be
accessed while the upgrade key is
being obtained.