Brother PE-DESIGN 7.0 Quick Reference Manual page 16

→ After a short while, the Choose Setup Language dialog
box automatically appears.
Select the desired language, and then click OK.
→ The InstallShield Wizard starts up, and the fi rst dialog
box appears.
→ A dialog box appears, allowing you to select the folder
where the software will be installed.
14
Click Next to continue with the installation.
Click Next to install the application into the
default folder.
Memo:
The following installation procedure
•
includes descriptions and dialog box-
®
es for Windows XP. The procedure
and dialog boxes for other operating
systems may be slightly different.
Memo:
If the installer does not automati-
•
cally start up:
1. Click the Start button.
2. Click Run.
→ The Run dialog box appears.
3. Type in the full path to the in-
staller, and then click OK to start
up the installer.
For example: D:\setup.exe (where
"D:" is the name of the CD-ROM
drive)
Memo:
To install the application into a dif-
•
ferent folder:
Click Browse.
1.
2. In the Choose Folder dialog box
that appeared, select the drive and
folder. (If necessary, type in the
name of a new folder.)
3. Click OK.
→ The Choose Destination
Location dialog box of the
InstallShield Wizard shows the
selected folder.
4. Click Next to install the applica-
tion into the selected folder.
• To return to the previous step, click
Back.
• To quit the installation, click
Cancel.