Brother PE-DESIGN 7.0 Quick Reference Manual page 47

Automatically Converting an Image to an Embroidery Design (Auto Punch Function)
→ The following message appears.
Click OK.
→ The following message appears.
Click OK.
c
Quit Layout & Editing.
Click File, then Exit.
Note:
• Before using the original card,
make sure that the designs on the
card are no longer needed or make
sure to store them on your hard
drive or other storage media.
Note:
• If the card writer module is not
correctly connected or powered,
an error message of "No card
writer module is connected.Please
connect card writer module." will
appear.
• If the original card is not inserted
or is defective, an error massage of
"No original card is inserted. Please
insert an original card." will appear.
45