G
AS
A Blocked Drain Kit (part #0270K00012) is available and MUST BE USED
(Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This includes all safety
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all safety
warnings. Often during installation or repair it is possible to place yourself in a position which is more hazardous than
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good safety
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is
a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.
*NOTE: Please contact your distributor or our website for the applicable Specification Sheet referred to in this manual.
IO-300M
9/12
©
-F
W
IRED
I
NSTALLATION
This furnace is shipped from the factory as a Dedicated Upflow.
if the furnace is installed Horizontal Left or Horizontal Right.
Installer: Affix all manuals adjacent to the unit.
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central Furnaces.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
precautions and related items.
when the unit is in operation.
customer in its safe use.
practices...follow them.
Goodman Manufacturing Company, L.P.
5151 San Felipe, Suite 500, Houston, TX 77056
www.goodmanmfg.com
2006-2008, 2010-2012 Goodman Manufacturing Company, L.P.
GKS9
A
ARM
IR
I
NSTRUCTIONS
F
URNACE