Settings For Speakers (Speaker Setup) - Sony SAVA-D900 Operating Instructions Manual

Dvd home theater active speakersystem
Hide thumbs Also See for SAVA-D900:
Table of Contents

Advertisement

Settings
for Speakers
(SPEAKER
SETUP)
th
t_
IR
a
Ih
Specifying
the rear speaker
position
and height
Specify the position and height of the rear speakers,
referring
to the diagram
on page 17. The default setting is
underlined.
• BEHIND/LOWI
Select this if the rear speakers
are located in the section
O and O.
• BEHIND (HIGH)
Select this if the rear speakers
are located ill the section
O and O.
• SIDE (LOW)
Select this if the rear speakers
are located in tile section
O and _.
• SIDE (HIGH)
Select this if the rear speakers
are located in the section
O and O.
1DISTANCE
See page 17.
1BALANCE
See page 18.
1LEVEL
See page 18.
1TEST TONE
You can hear the test tone from each speaker
in sequence.
The default setting is underlined.
• OFF: The test tone is not emitted from speakers.
• ON: During adjustment
of "BALANCE"
or "LEVEL,"
the test tone is emitted
from both speakers
simultaneously.
To adjust the volume
of all the speakers at one
time
Use the MASTER VOLUME +/- buttons.
To return to the default
setting
Select the item, then press CLEAR on the remote.
1
2
3
4
When nothing is played, select "SPEAKER SETUP"
after pressing DVD SETUP on the remote.
Select "TEST TONE" and set "TEST TONE" to "ON."
You will hear file test tone from each speaker
in
sequence.
From your listening
position,
select "BALANCE"
or
"LEVEL"
and adjust
the value of "BALANCE"
and
"LEVEL"
using the t/_,
buttons.
During
this adjustment,
the test tone is emitted
from
both
speakers
simultaneously.
Select "TEST TONE" and set "TEST TONE" to "OFF"
to turn off the test tone.
58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents