Sony SAVA-D900 Operating Instructions Manual page 42

Changing the Sounds
When you select "AUDIO," the playing chaimels are
displayed on the screen.
In Dolby Digital format, the signals from monaural to 5.1
channels can be recorded on a DVD. Depending on the
DVD the number of the recorded chal_lels may be
different.
t 2_27) PLAY
I 8 (34) DVD
Current
audio
format*
Current
playing
program
format**
The display examples are as follows:
• FCM (stereo)
PROGRAM FORMAT
PCM48kHz24bits
To select_ press_;IF4"II'_ _then_.
• Dolby Surround
PROGRAM F ORMAT
IX)LB'_OtGITAL ._0:
ID
=
Z
Q
£
* "PCM," "DTS" or "DOLBY DIGITAL" is displayed. In
"DOLBY DIGITAL" case, the channels in the playing
track are displayed by number as follows:
The case of Dolby Digital (AC-3) 5.1 oh:
Rear component 2
r-- 1
Front component 2 LFEILow
+ Center component 1 FrequencyEffect)
component 1
** The letters in the program format display mean the
following:
L: Front (L)
R: Front (R)
C: Center (monaural)
LS: Rear (L)
S: Rear (monaural) - tile rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal
KS: Rear (R)
LFE: LFE (Low Frequency Effect)
• Dolby Digital 5.1 ch
.DTS
,,,_o
Youcanfind DolbySurround-encoded s oftwareby lookingat
the packaging
Use discs with the =[_1,...[_.= logo. In order to enjoy Dolby Digital
playback you must use discs bearing this logo.
42