Sony STR-V333ES Operating Instructions Manual page 27

[] MULTI CHANNEL DECODING indicator
This indicator lights when the unit is decoding signals
recorded in a inulti channel format.
[] 2ND AV button (STR-V444ES)
2ND AUDIO button (STR-V333ES)
Press repeatedly to select 2 channel (stereo) audio and
video signals (STR V444ES) or audio signals only
(STR V333ES) fbr output to a stereo amplifier in
another room (page 11).
Each press selects another audio (and video source)
(except PHONO) to be output fl'om tire 2ND AV jacks
(STR V444ES) or 2ND AUDIO jacks (STR V333ES).
"SOURCE" selects tire same program source as the
nraiil f\lnction controls.
• Even if 2ND AV o1"2ND AUDIO is set to "SOURCE", the
sotmd from fl'ont speakers (L/R) is not output when the
receiver is set to 5.1CH INPUT.
• Only signals fl'om components connected to tile analog
inputs are output through tile 2ND AV or 2ND AUDIO
jacks. No signals are output fl'om components connected to
only the digital inputs.
• When you use AUDIO SPLIT to assign a digital audio
input (fi0r example, DVD OPTICAL) to tbe main ffmction
and set 2ND AV or 2ND AUDIO to "SOURCE". the analog
audio signals of tile assigned audio (for example, analog
audio input of DVD) is output flora tile 2ND AV jacks
(STR V444ES) or 2ND AUDIO jacks (STR V333ES).
[] SET UP button
Press to activate the setup mode, then use the cursor
buttons ([]) to select any of tire following parameters.
You can inake various settings using the jog dial (1_).
When you select You can
Speaker setup Sperifk/the fl'ont, center, rear L/R, and
rear center speaker sizes, tile rear L/R
speaker position, and whether or not you
are using a sub woofer (page 18).
Speaker Distance Specify the fl'ont, center_ rear L/R, and
rear center speaker distances and the unit
of measurement (page 20).
Crossover Specify tile fl'ont, centen and rear L/R
fl'equency speaker bass crossover flequency (page
22).
LFE High Cut Select tile cutoff fl'equency of tile LFE
Frequency channel High Cut Filter (page 22).
Distance IInit Specify units for setting speaker distance
(page 22).
5.1CH Visual Specifk/the video input to be used with
the audio signals flora the 5.1CH INPI IT
jacks (page 52).
Digital Power Specify whether or not the system turns
Management off tbe power of the unnecessary digital
circuits automatically (page 52).
Video Power Specify whether or not the system turns
Management off the power of the unnecessary video
circuits automatically (page 52).
Sound Field Link Set the automatic application of the
sound field to a program source (page
52).
Auto Ftlnrtion Sperify whether or not Sony romponents
connected via control A1 cords will tmn
on o1"offwhen selected using the
function buttons (page 52).
2 Way Remote Turn on or off"response to remote signals
sent flora tile 2 way remote (page 53).
Command mode Set when you use the second remote in
(STR V444ES only) tbe 2nd room (page 53).
OSD color Specify tile color of the on screen
display (page 53).
* Only u'hen dm speaker isset to"SMALL" in dmspeakersetup
t)aramete1:
[] ENTER button
Press to enter individual characters for tire preset
station and prograln source names.
[] Cursor buttons (</>)
Press to select various speaker level, surround, and
equalizer parameters (etc.).
O
O
"111
r,*
w
3
$,
o
¢D
27