23Initial Setup - Sony BRAVIA KDL-52XBR5 Operating Instructions Manual

Light Sensor
PC Power
Management
Logo Illumination
Enables the automatic picture (screen) brightness control. Light Sensor measures the
room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the ambient room light conditions.
• Be sure not to put anything around the sensor, as its fimction may be affected (see
page 25).
• In low light the range of the backlight control is reduced when
Light
Sensor is set to
On.
On Automatically enters to standby mode when there is no signal input
for more than 30 seconds. The STANDBY LED on the front panel
will illuminate when PC Power Management switches the TV to
standby mode.
Off Turns off PC Power Management.
• To bring the TV out of standby mode and recover TV features, press TV POWER on the
remote control.
• PC Power Management is
not VESA-compliant.
Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.
2
If you have missed the Initial
Setup
when you first connected the TV or if you want to scan all receivable
channels, you can run the Initial
Setup.
Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be aflected by this Initial
Setup.
• Favorites list will be cleared each time you run the Initial Setup.
45