Setting Up The Channel List - Initial Setup - Sony BRAVIA KDL-40S2500 Operating Instructions Manual

Getting Started
Setting Up the Channel List – Initial Setup
18
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up.
POWER
1
Press to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to highlight the on-screen display language. Then press
The message "First please connect cable/antenna. Do you want to start
Auto Program?" appears.
3
B b
Press / to highlight "OK" then press
The message "Auto Program" appears. Then the message "Continue
programming digital channels?" appears. This may require 50+ minutes
for completion.
4
B b
Press / to highlight "OK" then press
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on pages 37 and 38.
To add individual digital channels
❑
Use the Digital Channels feature as described on page 38.
.
.
.