Levels And - Sony STR-DG810 Operating Instructions Manual

8: Adjusting the speaker
levelsand balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
Tile receiver employs a test tone with a frequency
centered at 800 Hz.
-1
............. 3-6
MASTER
"-- VOL +/-
2
3
4
5
6
7
8
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
Press MENU.
"l-LEVEL" appears on the display.
Press @ or. to enter the
menu.
Press ,i,14,repeatedly to select
"T. TONE".
Press (_) or. to enter the
parameter.
Press ,i,14,repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left -+ Center -+ Front right -+
Surround right -+ Surround back -+
Surround left _ Sub woofer
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting tile level
(LEVEL menu)" (page 43).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +1 . You can also
use MASTER VOLUME on tile receiver.
• The adjusted value are shown on the display
during ac[justment.
Repeat steps 1 to 6 to select
"T. TONE N".
You can also press any inpnt buttons.
The test tone tnrns oft'.
34us