Menu) - Sony STR-DG810 Operating Instructions Manual

• DUAL (Digital broadcast
language selection)
Lets you select tile language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound of both the main and sub
languages will be output.
• A.V. SYNC. (Synchronizes audio
with video output)
Lets you delay tile audio output so that the
time gap between the audio output and visual
display is minimized. You can adjust from 0
(0 ms) to 20 (200 ins) in 1 (10 ms) steps.
Notes
• This p:muneter is useful wlmn you use a large LCD
or plasma monitor or a prt_iector.
• This parameter is not valid when
the multi<hannel PCM signals are received via
an HDMI IN.jack.
ANALOG DIRECT function is being used.
• D. ASSIGN (Digital audio input
assignment)
Lets you assign the digital audio input to other
input source. For details, see "Listening to
digital sound from other inputs (DIGITAL
ASSIGN)" (page 75).
• NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see "Naming inputs" (page 76).
Settingsfor thevideo
(VIDEOmenu)
You can use the VIDEO menu to make various
adjustments for HDMI settings, assign the
composite video input to DMPORT input and
to name inputs.
Select "6-VIDEO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 39) and
"Overview of the menus" (page 40).
VIDEO menu parameters
• DMPORT V. (DIGITAL MEDIA
PORT video assign)
Lets you assign the composite video input to
DMPORT input so that you can view the
images in the TV. For details, see "Watching a
connected component through DMPORT
connection" (page 74).
3
O
ID
• AUDIO (HDMI AUDIO)*
Lets you set the HDMI audio output from tile
playback component connected to the receiver
via an HDMI connection.
• AMP
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. Multi-channel
sound can be played back as it is.
Note
Audio signals m'e not output from the TV's
speakers.
continued_
47us