Selectinga Pre- Programmed Sound Field - Sony STR-DG810 Operating Instructions Manual

If you connect a sub woofer
This receiver will generate a low freqnency
signal l\_r output to the sub woofer when there
is no LFE signal, which is a low-pass sound
effect outpnt from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for "NEO6 CIN" or "NEO6
MUS" when all speakers are set to "LARGE".
Notes
• This function does not work in tile l'ollo_ ing cases.
Input signals of which the sampling frequency is
more than 48 kHz are being received.
The multi-channel PCM signals are received via
an HDMI IN jack.
• Dolby Pro Logic IIx decoding does not functkm for
signals with a sampling frequency of more than
48 kHz.
• NEURAL SURROUND is activated as a PCM
signal of which the sampling frequency is less than
48 kHz or a 2 channel analog signah The NE1JRAL
SURROUND processing will be turned off
automatically when another type of signal is input.
The beginning of the sound may be dropped out
when the SURROUND processing is turned on/off.
Tip
When a multi channel signal is input, only Dolby
Pro Logic llx decoding is el'fcctive. When you select
decoding modes other than Dolby Pro Logic IIx.
multi channel sound (being encoded) is output.
Selectinga pre-
programmed sound field
Yon can take advantage of surround sound
simply by selecting one of the receiver's pre-
programmed sound fieMs. They bring the
exciting and powerflfl sound of movie theaters
and concert halls into your home.
--MUSIC
-- MOVl E
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a
sound field for music.
For details, see "Types of sound fiekt
available" (page 55).
54us