Menn) - Sony STR-DG810 Operating Instructions Manual

• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• Tile sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV. even if you play
multi-channel software.
• When you connect the receiver to a video
component/pr_jector, etc.), sound may not be
nutput from the receiver. In this case. select
"AMP".
• CONTROL (HDMI CONTROL)*
Lets you turn the HDMI CONTROL function
on or oft'.
For details, refer to the HDMI CONTROL
Guide supplied with the receiver.
• NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see "Naming inputs" (page 76).
: When you select this parameter, the "HDMI"
indicator flashes in the display.
Settingsforthe system
(SYSTEMmenu)
You can use the SYSTEM menu to set the size
and distance of the speakers connected to this
system.
Select "7-SYSTEM" in the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 39) and
"Overview of the menus" (page 40).
SYSTEM menu parameters
• SW SPK (Sub woofer)
• NO
If you have not connected a sub woofer,
select "NO". This activates the bass
redirection circuitry and outputs the LFE
signals from other speakers.
• YES
If you have connected a sub woofer, select
"YES".
Tip
In oMer to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend setting the
sub wnofer's cut off frequency as high as possible.
• FRT SPK (Front speakers)
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
"SMALL", the center and surround speakers
are also automatically set to "SMALL"
(unless previously set to "NO").
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". When the sub woofer is set to
"NO", the front speakers are automatically
set to "LARGE".
48us