Sony HT-CT150 Operating Instructions Manual page 31
Hide thumbs
Also See for HT-CT150:
- Operating instructions manual (124 pages) ,
- Service manual (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Enjoying
multiplex
broadcast
sound (DUAL
MONO)
You
can enjoy
multiplex
broadcast
sound
when
the system
receives
an AC-3
multiplex
broadcast
signal.
• To receive an AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable, and set the digital output mode
of the digital satellite tuner to AC-3.
1
Select"AUDIO"
in the AMP menu, then
(2_) or -).
press
2
Select
"DUAL MONO," then press
@
or -).
3
Select
the setting
and press
@.
• MAIN:
Plays back only the main
channel.
• SUB:
Plays back only the sub
channel.
• MAIN/SUB:
Main sound is output from
the left speaker and sub
sound is output from the
right speaker.
Enjoying
the sound at low
volume
(NIGHT
MODE)
You can enjoy sound effects and hear the dialog
clearly even at a low volume level using this
Iimction.
1
Select"AUDIO"
in the AMP menu, then
press _
or
A
-1
2
Select
"NIGHT
MODE," then press
@
or -).
3
Select
the setting
and press
@.
• ON:
Turns on the "NIGHT
MODE"
function.
• OFF: Turns offthe flmction.
i13
• You can listen to Dolby Digital sound at low volume
by using AUDIO DRC (page 30).
Setting
the sound from the
satellite
tuner
(INPUT
MODE)
Even if you connect the satellite tuner to the
HDMI SAT/CATV
input jack of the system.
multi-channel
sound may not be output
depending
on the satellite tuner. In this case.
connect a digital optical cord to the SAT/CATV
OPT IN jack of the system in addition to an
HDMI cable, and make the following
setting.
1
Select"AUDIO"
in the AMP menu, then
press @
or ÷
2
Select"lNPUT
MODE," then press
or -).
3
Select"OPT"
and press @.
• AUTO:Preferentially
output the sound
signal from the HDMI SAT/
CATV input jack.
• OPT:
Output the signal from the SAT/
CATV OPT IN jack.
Changing
the brightness
of
the front panel
display
(DIMMER)
The brightness
of the flont panel display can be
set to one of 2 levels.
1
Select"SYSTEM"
in the AMP menu,
then press (@) or ÷
v
2
Select "DIMMER,"
then press (_
or ÷
3
Select
the setting
and press
@.
• ON:
Dim.
• OFF: Bright.
1>
I:1.
<
--1
0
I:1.
-I
€.Q
u)
continued
31GB
- Quick Links:
- Connecting the Speaker
Hide quick links:
Advertisement
Table of Contents
