Sony HT-CT150 Operating Instructions Manual page 22

(System Power Off)
• Depending on the status, the connected components
may not be mined oft'. For details, refer to the
operating instructions of the connected components.
When you turn the TV offby using the power
button on the TV's remote, the system and the
connected components turn off automatically.
Also, when you turn the TV offby using the
system's remote, the system and the connected
components turn off automatically.
TV
(yellow)
• I .2 .3
E] EE]
• 4 .5 ,6
• 7 .8 .9
[Z] [Z]
•CLEAR
.0/10
*ENTER
POPUP/ NIGHT
TOPMgNU MENU MODE SLEEP
• AUDIO SUBTITLE ANGLE "DISPLAY
} 1
*GUIDE AMP MENU
®1'_/O
,RETURN/ -TOOLS/
EXIT
,HOME
OPTIONS
{i_ []i] CK1EEl
TV VOL TV CH
MASTER VOL SOUND FIELD
• MUTINGQO [_
TV SHIFT
©
AV I/(_
While pressing and holding TV (yellow),
press AV I/_.
The TV, the system, and the connected
components are turned off.
(HDMI SIGNAL PASS THRU)
When using "BRAVIA" Sync, you can enjoy
image and sound fiom a Blu-ray Disc, etc., on
the TV, even if the system is in standby mode.
Power consumption in standby mode is also
reduced automatically when the TV is turned off
if"PASS THRU" is set to "AUTO."
The default setting is "AUTO."
• Tiffs function is available only when "CTRL HDMI"
is set to "ON."
PoP uP/ NIGHT
TOP MENU MENU MODE SLEEP
•AUDIO SUBTITLE ANGLE -DISNAY
_ EZ] _iEZ3
-GUIDE AMP MENU
O
1
2
3
Press AMP MENU.
Press ,1,14,repeatedly until "SET HDMr'
appears, then press @ or ÷.
Press t"/4, to select "PASS THRU," then
or ÷.
press
22 GB