System Requirements; Energy Star Compliance - Epson CPD 8882-R1 Printer Basics Manual

System Requirements

To use your printer and its software, your system should have:
An IBM
486/25 MHz (for Windows 95 or Windows NT
processor recommended)
Microsoft
At least 16MB of RAM (32MB for Windows 95 or 98, or 64MB for
Windows NT 4.0 recommended)
At least 50MB of free hard disk space (100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed (2
installing the printer software
A high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet
long); the cable must have a D-SUB, 25-pin, male connector for your computer
and a 36-pin, Centronics
If you want to use your EPSON Stylus COLOR 660 with Windows 98 USB or a
Macintosh ®
available. You can purchase the kit from EPSON Accessories at (800) 873-7766 or
visit our website at www.epsonsupplies.com (U.S. sales only). In Canada, please call
(800) 873-7766 for dealer referral
Printer Device and Windows 98 USB drivers are included on the CD-ROM that
comes with your printer.
E
NERGY
As an E
NERGY
this product meets the E
efficiency. The EPA E
program is a voluntary partnership with the computer and
office equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax machines,
and copiers in an effort to reduce air pollution caused by power generation.
4
®
compatible PC with at least a 486/66 MHz (for Windows
®
Windows 95, Windows 98, or Windows NT 4.0
) CD-ROM drive (quad-speed [4
x
®
compatible connector for the printer
with a built-in USB port, an optional USB/Parallel Adapter kit is
S Compliance
TAR
S Partner, EPSON has determined that
TAR
NERGY
S
NERGY
The Macintosh printer driver and EPSON USB
.
S guidelines for energy
TAR
office equipment
TAR
®
4.0) processor (Pentium
] or faster recommended) for
x
®
98) or
®