Vizio P42HDTV User Manual page 53

Table of Contents

Advertisement

VIZIOP42HDTV UserManual
3°6
Proqramminq
the
VIZIO
Universal
Remote
Control
You can program the remote control to work with up to four different components.
Listed below are the
steps for programming your VCR, Cable Box and DVD Player.
3_E1
Proqramminq
tor
VER
1.
Manually turn on the VCR.
2.
Press the VCR button on the remote control.
3.
Press and hold the SETUP button until the LED LIGHT flashes twice.
4.
Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons.
If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5.
Point the remote control at the VCR and press the POWER button. The VCR will turn off.
3.6.s
Programming
for
Cable
SebTop
Box
1.
Manually turn on the Cable Box.
2.
Press the CBL button on the remote control.
3.
Press and hold the SETUP button until the LED LIGHT flashes twice.
4.
Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons.
If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash
twice,
repeat
Steps
2 through
4 with the next code listed for the
component
and
manufacturer.
5.
Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
Version 6/14/2006
53
V
www.VlZlOCE.com

Advertisement

Table of Contents
loading

Table of Contents