Table of Contents
Advertisement
Quick Links
VlZlO VP504 FHDTV10A User Manual
Dear VlZlO Customer,
Congratulations
on
your
new
VIZlO
VP504
FHDTVlOA
High Definition
PLASMA
Television
purchase.
Thank
you for your support.
For
maximum
benefit of your set, please read these
instructions
before making any adjustments,
and
retain them for future reference.
We hope you will
experience
many years of enjoyment
from your
new
VlZlO
VP504
FHDTVlOA
High Definition
Television.
For assistance,
please call (877)-698-4946
or e-
mail us at techsupport@vizio.com.
To purchase
or inquire about accessories
and
installation
services
for
your
VlZlO
PLASMA
HDTV, please visit our website at www.vizio.com
or call toll free at (888)-849-4623.
We recommend
you register your VlZlO VP504
FHDTVlOA
either
at
our
website
www.VlZlO.com
or fill in your registration
card
and mail it in.
For peace of mind and to protect
your investment
beyond the standard warranty,
VlZlO
offers
on-site extended
warranty
service
plans.
These
plans
give additional
coverage
during the standard warranty
period.
Visit our
website or call us to purchase a plan.
Write down the serial number located on the back
of your VP504 FHDTVl OA.
Purchase Date
VlZlO is a registered trademark of VlZlO, Inc. dba V, Inc.
HDMI logo and "High Definition Multimedia Interface" are
registered trademarks of HDMI Licensing LLC.
Manufactured
under license from Dolby Laboratories.
Delby and the double-D symbol are trademarks of Dolby Laboratories.
Version 4/8/2008
1
www.VlZlO.com
Advertisement
Table of Contents
Related Manuals for Vizio VP504FHDTV10A
Summary of Contents for Vizio VP504FHDTV10A
- Page 1 To purchase or inquire about accessories installation services your VlZlO PLASMA HDTV, please visit our website at www.vizio.com or call toll free at (888)-849-4623. We recommend you register your VlZlO VP504 FHDTVlOA either website www.VlZlO.com or fill in your registration card and mail it in.
- Page 2 VlZIOVP504 FHDTV10A U serManual Important SaffetV Instructions This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product.
- Page 3 Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation, Version 4/8/2008 www.VIZIO.com...
- Page 4 VlZlO VP504 FHDTV10A User Manual Openimq Packaqe Your VlZlO VP504 FHDTVl0A and its accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VP504 FHDTVl0A is in good condition and that all of the accessories are included.
- Page 5 VlZIOVP504 FHDTVl 0 AUserManual ffor Rdditi®naL Certiffied Rocessories VI210 gPS© 4 FMDTVI©R sotd sepamatetv Wall Mounts High Definition Cables Extra or replacement Remote VlZlO also offers Installation Services and Extended Warranty Services for your VlZlO VP504 FHDTVl 0A To purchase or inquire about additional accessories and services for your VlZlO product, visit our web site at www.VlZlO.com or call us toll free at 888-VlZlOCE...
- Page 6 TV; our brackets come with different length screws. To find the perfect mount for the VlZIO VP504 FHDTV10A, browse VIZIO's certified mount selection at www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
-
Page 7: Table Of Contents
VlZIOVP504 FHDTVl 0 AUserManual Tabke Contents Contr®ta ..............Chapter i Basic Connections 1.1 Front Panel ................................1.2 Side Panel Controls ............................. 1.3 Rear Panel Connections ........................... 1.4 Right-Side Panel Connection ..........................1.5 VlZIO Universal Remote Control ........................1.5.1 Insertion of Batteries in the Remote Control ....................1.5.2 Remote Control Range .......................... - Page 8 VlZlOVP504 FHDTV10A U serManual 4.4.2 Auto Search ............................... 4.4.3 Partial Channel Search ..........................4.4.4 Skip Channel ............................. 4.4.5 MTS ................................4.4.6 Time Zone ..............................4.4.7 Daylight Saving ............................4.5 DTV / TV Input Setup ............................4.5.1 Language ..............................4.5.2 PIP (Picture-in-Picture) ..........................
-
Page 9: Front Panel
VlZIO VP504 FHDTVl 0A User Manual Chapter Basic Controls Connections Front Panel POWER 'VIZlO' LIGHT- The VlZlO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR - This is the window through which all of the remote control signals pass to the sensor. -
Page 10: Rear Panel Connections
The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here.. Your VIZIO Certified HDMI HDMI-DVI cables... -
Page 11: Right-Side Panel Connection
VlZIO VP504 FHDTV10A User Manual RiqhtoSide Pane[ Connection NDMI 3 - Connect the third source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the side of the TV indicates this connection. NDMI 4- Connect the fourth source for digital video such as a DVD multimedia... -
Page 12: Vlzio Universal Remote Control
VlZIO VP504 FHDTV10A User Manual UIZIO Universal Remobe Control The VIZlO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages. Remote LED - Blinks when the remote operates. This button starts all programming of the Remote Control. - Page 13 VlZlOVP504 FHDTV10A U serManual Usethisbutton fortheOn-Screen D isplay (OSD) m enus. Thisbutton displays theimage andsystem information d isplay. Use the NaVigation Wheelto operatethe On-Screen Display (OSD)afterit hasbeenactivated bypressing the MENU button. Usethe OK buttonto selectyourchosenoptionin On- Screen Display (OSD) m enus. GUIDE- This buttondisplaysprogram information.NoI:e: f fs b_:/:o_ _ s o_y...
- Page 14 VlZlO VP504 FHDTV10A User Manual When CABLE is selected and the code to match your Cable (or Satellite) Box has been entered, this button will operate the Cable (or Satellite) Box the same as this button on your Cable (or Satellite) Remote.
-
Page 15: Insertion Of Batteries In The Remote Control
VlZlOVP504 FHDTV10A U serManual x,$o Insertion Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. -
Page 16: Which Video Connection Should I Use
VlZlOVP504 FHDTV10A U serManual Chapter 2 Connectinq Equipment Connecbion I Use? 201 Which Video ShooLd The VlZlO VP504 FHDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. HDMI (High-Definition Multimedia Interface) - It is... -
Page 17: Connecting Coaxial (Rf)
HDTV. Turn on the power to the HDTV and VCR. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control. Version 4/8/2008 www.VIZIO.com... -
Page 18: Connecting Your Hdtv Set-Top Box
VlZIO VP504 FHDTV10A User Manual a03 Connectinq Your HDTV Set-Top 2o3oi Usinq HOMI Input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the PLASMA HDTV for optimal results. {Best]: Connectinq Voum HDTV Set-Top Turn off the power to the HDTV and HDTV Set-Top Box. - Page 19 VlZIO VP504 FHDTV10A User Manual HDTV SetoTop Boxes with OWl: Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the HDTV. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVl output on your HDTV Set-Top Box and connect the other...
-
Page 20: Using Component Video
VlZIO VP504 FHDTV10A User Manual 2,3°2 Usinq Component Video your Connectinq HOTV SetoTop {Better}: HDMI AV/S-VIDEO HDMI HDMI AUBO Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding (green color) connector in the Component group (green color area - row of connectors... -
Page 21: Connecting Your Basic Set-Top Box
VlZIOVP504 FHDTV10A U serManual Turn off the power to the HDTV and Set-Top Box. Using AV Cable, connect Video (yellow color) connector your Set-Top Box to the corresponding Video (yellow color) connector in the AV input (yellow color area) at the rear of the HDTV. Using the white and red connectors, connect the cable to the audio output connectors... -
Page 22: Connecting Your Dvd Player
VlZlO VP504 FHDTV10A User Manual 2°5 Connecbinq Your Prayer You have several options for connecting your DVD player to your VP504 FHDTV10A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. - Page 23 VlZlO VP504 FHDTV10A User Manual Ptsvers with DVI: Turn off the HDTV and DVD player. Using a HDMI-DVl cable, connect the DVl end to your DVD player and the HDMI2 end to the HDMI Input (white color area) at the rear of the HDTV. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVl output of...
-
Page 24: Using Component Video
VlZIO VP504 FHDTV10A User Manual 2,,S°2 Usinq Component Video your Connectinq Ptaver (Setter): HDMI ANALOG AV/S-VIDEO ONL_NL_J HDMI HDMI AUDIO Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV. -
Page 25: Using S-Video (Av/S-Vldeo)
VlZlO VP504 FHDTV10A User Manual Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the ..rear of your DVD player to the S-Video jack in the AV/S-VlDEO input (yellow/red area) at the rear of the HDTV. Connect an audio cable... -
Page 26: Connecting Your Vcr Or Video Camera
VlZIOVP504 FHDTV10A U serManual Conneotinq Your Video Camera HDMI HDMI AUDIO ANALOG Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV input (yellow/red area) at the rear of the HDTV. -
Page 27: Connecting An External Receiver/Amp
VlZIOVP504 FHDTV10A U serManual Eonnectinq external Receiver/Amp HDMI HDMI HDMI AUDIO Turn off the power to the PLASMA HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors Receiver/Amp and connect the other end to the ANALOG (white... -
Page 28: Optical Output Of Audio Received
VlZIOVP504 FHDTV10A U serManual 2,,7,,£ Optical Output Rudio received If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VP504 HDTVl 0A. HDMI HDMI HDMI AUDIO... -
Page 29: Connecting A Pc Computer
VlZIOVP504 FHDTV10A U serManual Connecting a PC Computer HDMI HDMI HDMI AUDIO AV/S-VIDEO Turn off the power to the HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. -
Page 30: Preset Pc Resolutions
VlZlO VP504 FHDTV10A User Manual 2,_8,_ Preset Resokutlons If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920xl 080 at 60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set this timing mode), Please see the table below for the factory preset resolutions, 640x480 31,47... -
Page 31: Chapter 3 Sett_Nq Up To Watch Tekejlslon
VlZlO VP504 FHDTV10A User Manual Chapter 3 Se inq Watch TeLevision For 'Preparing Your PLASMA HDTV for Wall Mounting', see page 6. Basic PLRSMR HDTV Start Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. - Page 32 VlZIO VP504 FHDTVl 0A User Manual The Tuner screen will be displayed; default choice is Antenna. If you are using Cable (No Box) Service, press the button on the remote control to highlight CABLE. Press the button on the remote to go to the next screen. The Channel Scan screen will be displayed;...
- Page 33 VlZIOVP504 FHDTVl O AUserManual The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. No_e:DTVdg a boadcas s _o/:avaabe aeas Reler owww.antennaweb.orq olte _1o _ao'_ aboJ avaab /:y_ youraea ypeofa en_aa_d _ w_c_ dec ontopot/:yo_ a_e_a.
- Page 34 VlZlO VP504 FHDTV10A User Manual a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up.
- Page 35 VlZlO VP504 FHDTV10A User Manual Press MENU or OK button to select it. e. Press either D or _ button to change setting to Normal, and then press the LAST key again to go back to previous screen. f. Press either _ or_button select the Picture Mode option.
-
Page 36: Watching A Tv Program
VlZlOVP504 FHDTV10A U serManual Watchinq Pr©qram Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. -
Page 37: Adjusting Basic Hdtv Settings
VlZIO VP504 FHDTV10A User Manual HDTU 3.3 Rd]ustlnq Basic Settlnqs Volume To adjust the volume, press and hold the VOL+ or VOL- button on the side of the PLASMA HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available channels, press the CH+ or CH- button on the side... -
Page 38: Program Information
VlZlOVP504 FHDTV10A U serManual Proqram Information Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner, Press the or _ button to scroll up or down the channels,... -
Page 39: Hdtw
VlZIO VP504 FHDTV10A User Manual Chapter 4 Rdvanced Rd]ustment HDTW Usinq Someen DispLay {OSD} The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. -
Page 40: Dtv / Tv Input Picture Adjustment
VlZIOVP504 FHDTV10A U serManual / TV input PictuFe Rdoustmemt Mode 4o2,,1 Picture When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the _ button to highlight the Picture Mode selection. Use the D or _ button to choose from Custom, Standard, Movie, Game, Vivid, Football, Golf, Basketball and Baseball,... -
Page 41: Contrast
VlZlOVP504 FHDTV10A U serManual 4os.3 Contrast Press the _button to highlight the Contrast selection. Press the _II button to start adjusting the contrast and the menu page will disappear and be replaced by a small Ceqast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. -
Page 42: Sharpness
VlZlO VP504 FHDTV10A User Manual 4.3.8 Sharpness Press the _ button to highlight the Sharpness selection. Press the _ button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. -
Page 43: Reset Picture Mode
Press the button to highlight the option for Reset Picture Mode selection Press _ button to return on Picture settings to factory default. Once the adjustments are completed press the LAST button repeatedly exit completely. 1"J ..... Version 4/8/2008 www.VIZIO.com... -
Page 44: Dtv / Tv Input Audio Adjustment
VlZIO VP504 FHDTV10A User Manual / TV input Rudio Rdgustment Rudio Node 4°3°i When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the _ button to highlight the Audio Mode selection. -
Page 45: Balance
VlZlOVP504 FHDTV10A U serManual 4.3.3 8atamoe Press the _ button to highlight the Balance selection. Press the _ button to start adjusting the balance and the menu page will disappear and be replaced by a small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the nominal position. -
Page 46: Audio Out
VlZlOVP504 FHDTV10A U serManual 4.3.7 Rudio Press the button to highlight the Audio Out selection. Press either button to turn the audio out signal to Fixed or Variable. When it is set to variable, volume from the external speakers will change according to the volume setting on the TV. If it is fixed, the volume can only be changed by the settings on the external stereo system. -
Page 47: Dtv / Tv Tuner Setup
VIZIOVP504 FHDTV10A U serManual 4°4 / TW Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. -
Page 48: Partial Channel Search
VlZlOVP504 FHDTV10A U serManual 4,,4,3 Par ialL Search Channel If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Press the button to highlight Partial Channel Search selection. -
Page 49: Daylight Saving
VlZlOVP504 FHDTV10A U serManual 4-4-7 DsVUqh_ Ssvinq As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the a button to highlight the Daylight Saving selection. -
Page 50: Dtv / Tv Input Setup
VlZlOVP504 FHDTV10A U serManual / TU 4°S _nput Setup 4°S°i Lanquaqe When the MENU button is pressed, the On Screen Display (OSD) appears PICTURE adjustment page. Press the I button until the SETUP page is displayed. Press the I button to highlight the Language selection. - Page 51 PIP audio source selection. Press the _ or I_ button to choose the audio source from the main screen or the sub screen. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Version 4/8/2008 www.VIZIO.com...
-
Page 52: Adjusting Basic Pip Settings
VlZlO VP504 FHDTV10A User Manual 4,,S°3 Rd]usting Bas_o Se_inqs The PIP channel is independent of the main TV channel. To change the PIP channel, press the PIP CH button on the remote control. Alternatively, you can change the PIP channel by pressing the CH+ or CH- button. -
Page 53: Sleep Timer
VlZlOVP504 FHDTV10A U serManual 4,.5o4 Sleep Timem Press the a button to highlight the Sleep Timer selection. Press the D or _ button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes. Once the adjustments are completed press the LAST... -
Page 54: Input Naming
VlZlOVP504 FHDTV10A U serManual 6,,BOB Inpub Namlmq This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 7 characters; either letters or numbers or combinations of both. Press button to highlight this option. -
Page 55: Cc (Closed Caption)
VlZlOVP504 FHDTV10A U serManual 4,,5o7 {Ctosed Caption} Press the a button to highlight the CC (Closed Caption) selection. Press the _ button. A separate menu will appear with the following CC settings Closed Caption on Mute When selecting Closed Caption as a feature to be used;... -
Page 56: H/V Position
VlZlO VP504 FHDTV10A User Manual recommendations of setting these parameters since you, the user would have your own taste or like of them. Press the key labeled LAST as many times as it takes to exit the menu screens. 4,,So8 H/V Posibion Press the a button to highlight the H/V Position selection. -
Page 57: Dtv / Tv Input Parental Control
VlZIO VP504 FHDTV10A User Manual 4,,SoQ / TV Input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels then made available only after authorized password... -
Page 58: Us Tv Rating
VlZlOVP504 FHDTV10A U serManual Ratinq 4.5.1,1 Follow the procedure in the previous section to display the Parental Control menu and then press the a button to highlight US TV Rating selection. Press the OK button and the Block TV Rating panel will be displayed. -
Page 59: Us Movie Rating (For Us)
VlZlOVP504 FHDTV10A U serManual Novae Ratinq {For 4,,$°sa Press the a button to highlight the US Movie Rating selection. Press the I_ button and the Block Movie Rating panel will be displayed. In the Block Movie Rating panel you can customize the program blocking of the following Movie ratings: - General audience - Parental guidance suggested PG-13... -
Page 60: Canadian French Rating
VlZlOVP504 FHDTV10A U serManual 4,,Sos4 Canadian French Ratinq Press the a button to highlight the Canadian French Rating selection. Press the _ button and the Block Canadian French Rating panel will be displayed. In the Block Canadian French Rating panel you can customize the program blocking of the following ratings: General audience 8 ans+ -... -
Page 61: Blocked Unrated Programming
VlZIOVP504 FHDTV10A U serManual 4oS.1B Blocked Unrated Proqramminq Follow the procedure in the previous section 4.5.9 to display the Parental Control menu and then press the _l button to highlight the Block Unrated TV selection. Press the _button to turn-on or turn-off blocking of programming that does not have a... -
Page 62: Reset All Settings
VlZlOVP504 FHDTV10A U serManual 4,.5o @ Reset Rkk Settinqs Press the abutton to highlight the Reset All Settings selection. Press the I_ button to reset the TV to the default factory settings. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. -
Page 63: Hdmi Input Picture Adjustment
VlZlOVP504 FHDTV10A U serManual 4°8 HDMI Input Picture Ad]ustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input section 4.2. Once adjustments completed press the LAST button repeatedly exit the OSD completely. HDMI Input Audio... -
Page 64: Video Input Picture Adjustment
VlZIOVP504 FHDTV10A U serManual Input A.q Video PictuFe Rd]ustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. - Page 65 VlZIOVP504 FHDTVl 0 AUserManual 4,11,1 Auto Phase {_or Component input} Press the a button to highlight the H/V Position. Press the I_ button and the new H/V Position submenu will be displayed. Press the a button to highlight Auto Phase. Press the I_ button to execute this option.
-
Page 66: Video Input Parental Control
VlZIOVP504 FHDTVl 0 AUserManual Video Input Parental Contro[ The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.5.9. The menu difference is that there is no icon along the top for DTV / TV adjustments. -
Page 67: Contrast
VlZlOVP504 FHDTV10A U serManual TheBrightness a djusts the blacklevelsin thepicture. If thebrightness i s too lowyouwill notbeableto seethe detailin darkerpartsof the picture andif the brightness i s too highthe picture will lookwashed out. Oncetheadjustments arecompleted p resstheLASTbuttonrepeatedly t oexittheOSDcompletely. 4o 3o3 Comtmas Press the a button to highlight the Contrast selection. -
Page 68: Color Temperature
VlZlOVP504 FHDTV10A U serManual 4,,13.4 Color Temperature Press the a button to highlight the option for Color Temperature selection. The default is the 9300K (Cool) setting. Press the D or I_ button if you want to choose the 9300, 6500 or Custom option. Once the adjustments are completed press the... -
Page 69: Position
VlZlOVP504 FHDTV10A U serManual 4.13.7 V° Posibioo Press the a button to highlight the Vertical Shift selection. Press the _ button to start adjusting the vertical position of the picture. Use the D or _ button to adjust the vertical position. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. -
Page 70: Understanding Viewing Features
When watching a standard broadcast or full frame movie in this mode, the 4:3 Aspect Ratio (1.33:1 source) display image is stretched horizontally on the left and right sides to fill the TV screen. The center of the image is not stretched. Version 4/8/2008 www.VIZIO.com... -
Page 71: Maintenance
If the display still fails to perform as expected, contact the VlZlO for assistance by calling 1-877-MYVlZlO (698- 4946) or e-mail us at techsupport@vizio.com. No power. Make sure the power button is ON (White VlZIO Logo). Make sure AC power cord is securely connected to the AC socket. - Page 72 VlZlOVP504 FHDTV10A U serManual Power is ON but no screen Make sure the video cable supplied with the TV is secured to the correct video image. output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc.
-
Page 73: Telephone & Technical Support
Support Department at the number below. Customer support and quality service are integral parts of VlZlO's commitment to service excellence. For technical assistance contact our VlZlO Technical Support Department via email or phone. E-mail: techsupport@vizio.com Tel: 877-MYVlZIO (877-698-4946) -
Page 74: Compliance
VlZlOVP504 FHDTV10A U serManual CompLiance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. Canada Germany BASE/BS Japan Electric Appliance Control Act SoS FGG @ Radio ImtePCeremoe Statememt GLass NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 75: Specifications
VlZIOVP504 FHDTVl 0 AUserManual Ohap em 6 MisoeLLameoos Jo omma ioo B01 Specifications Panel 50" Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.576 mm (H) x 0.576 mm (V) Display Compatibility Full HDTV (1080P) Colors 1.073 Billion 1,000 cd/m 2 (typical) Brightness... -
Page 76: Glossary - Standard Definitions
VlZIOVP504 FHDTV10A U serManual Glossary o Standard DefiinitJons Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV "aspect ratio", that is, the screen's width as compared to its height. For example, a "32 inch TV screen"... -
Page 77: 6°3 Index
DNR (Dynamic Noise Reduction, Skip Channel, 48 Time Zone, 48 Tuner Mode, 47 Cleaning your VIZIO TV, 71 Connecting your DVD Player, 23 Coax (RF) Connecting your HDTV Set-Top Box, 19 Connecting [or DTV, 17 Component Connecting your DVD Player, 24... -
Page 78: Miscel
VlZlOVP504 FHDTV10A U serManual Audio Adjustment, 44 Parental Control Parental Control, 57 Picture Adjustment, 40 Block Unrated Progran_ming, 61 Special Features, 50 Canadian English Rating, 59 TV Picture Adjust Canadian French Rating, 60 Advanced Video, 42 Channel Block, 57 Brightness, 40, 66 DTV Rating, 60 Color, 41 Movie Rating, 59...