Table of Contents
Advertisement
VIZIOP42HDTV UserManual
s_8
Connectinq
an
e×terna[
Receiver/Amp
.
2.
.
4.
.
6.
7.
Turn off the power to the Plasma TV and Receiver/Amp.
Using an audio cable (white and red connectors),
connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area)
audio connectors at the rear of the Plasma TV.
Turn on the power to the Plasma TV and Receiver/Amp.
Then
press
the
MENU
button
on the
remote
control
to open the
On-Screen
Display (OSD) menu.
Press the
I
on the remote control to
select the Audio Adjust menu.
Press the _ll
on the remote control to
select SPEAKERS.
Press the
_
on the remote control to
select OFF so that the sound from the
Plasma TV will now be routed through
your Receiver/Amp system.
Opticat
Output
of
Audio
received
with
HO
Proqrams
If your sound system has a SPDIF (optical) digital audio
you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the
Plasma TV. This is active when receiving
digital audio with the programs from the
DTV input.
Version 6/14/2006
28
V
www.VlZlOCE.com
Advertisement
Table of Contents
