Vizio P42HDTV User Manual page 12

VIZtOP42HDTV UserManual
,1,4 VIZIO Universat Remote Control
The VlZtO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote button functions are explained on the following pages.
SET - This button starts all programming sequences.
Remote LED - Blinks when the remote operates.
POWER - Press this button to turn the TV on from the Standby
mode. Press it again to return to the Standby mode.
TV - This button has been pre-programmed to select the codes
to operate the P42HDTV.
VCR - This button selects a programmed VCR.
CABLE - This button selects a programmed cable TV set-top
box or a satellite TV set-top box.
DVD - This button selects a programmed DVD player.
Number Button Pad - Use these buttons to select a channel or
enter a password.
INPUT - This button allows the user to cycle through the inputs.
- / ENTER - This button works as a DASH button in the DTV
mode. When selecting a digital channel directly use this button
for the separation of main and sub-channels. For example,
channel 28-2 would be selected by the button sequence 2 8
ENTER 2.
CH (+ or -) - These buttons change the channels up or down.
LAST - This button recalls the previously viewed channel.
MUTE - This button turns the sound on and off. VOL (+ or -) -
These buttons turn the volume up or down.
MENU - Use this button for the On-Screen Display (OSD)
menus.
INFO - This button displays the image and system information
display.
GUIDE - This button displays program information. Noe: this
butch iso_y rciora o_DTV
EXIT - This button exits the On-Screen Display (OSD) menus.
_D_-These buttons navigate the On-Screen Display
(OSD).
OK - This button works to select your chosen option in On-
Screen Display (OSD) menus.
This is 8
remote supportinq up to
4 devices
{see Tt/,
CR@LE,
DVD buttons
at the
bop of
the remobe}_ if the
remote
is
not with
the TV button on
the remote to set the ffunotions
bsok to Tgo
Version 6/14/2006
12 O
www.VlZlOCE.com