Table of Contents
Advertisement
VlZlO VP422 HDTV10A User Manual
W ZIO
Remote
Control
GUIDE - This button displays program information.
Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic
Programming
Guide will
appear in the screen.
POWER - Press this button to turn the TV on from the Standby mode.
Press it again to return to the
Standby mode.
TV - Press this button to select TV.
AV - Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMPONENT
- Press this button to select the Component
(YPbPr) input.
Pressing this button repeatedly will take you through the Component input.
HDMI - Press this button to select the HDMI input. Pressing this button
repeatedly
will get you through
the HDMI (HDMI1,
HDMI2 and HDMI3)
different inputs
MENU - Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
_iD
AI_
- These buttons navigate the On-Screen Display (OSD).
MUTE - This button turns the sound on and off.
LAST - This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -) - These buttons turn the volume up or down.
CH (+ or -) - These buttons
change
the
channels up or down.
NUMBER BUTTON PAD - Use these buttons
to select a channel or enter a password.
INPUT - This button allows the user to cycle
through
the inputs.
Repeatedly
pressing
of
this button will step you through
the input
sources in the following sequence: TV, AV (S-
Video),
Component,
RGB,
HDMI1,
HDMI2
and HDMI3. Once you have stepped through
the entire sequence,
you will return to the
beginning.
- (DASH) - When selecting a digital channel
directly, use this button for the separation of
main
and
sub-channels.
For
example,
channel 28-2 would be selected by the button sequence 2 8 - 2.
Version 3/7/2008
11
www.VlZlO.com
Advertisement
Table of Contents
