Vlzlo Universal Remote Control - Vizio GV42L User Manual

VlZlO GV42L FHDTV10A User Manual
YIZIO Universak Remote Control
The VlZtO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote button functions are explained on the following pages.
Remote LED - Blinks when the remote operates.
This button starts all programming of the Remote Control.
_ress this button to turn the TV on from the Standby mode. Press it
again to return to the Standby mode.
This button selects a programmed DVD player.
This button selects a programmed Audio Receiver/Amp/Home
Theatre System.
This button selects a programmed cable TV set-top box or a
satellite TV set-top box.
This button has been pre-programmed to select the codes to
operate the VlZtO HDTV.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode. When selecting a digital
channel directly use this button for the separation of main and
sub-channels. For example, channel 28-2 would be selected by
the button sequence 2 8 DASH 2.
NOTE: This is a programmable remote supporting up to 4 devices (see TV,
VCR, CABLE, DVD buttons at the top of the remote). If the remote is not
working with your VtZtO TV, press the TV button on the remote to set the
functions back to TV.
Version 6/18/2007 14
www.VlZlO.com