Advertisement
ASSEMBLY
Set the CARDIO WALK in a cleared area and remove all packing materials. Do not dispose of the packing mate-
rials until assembly is completed. Assembly requires
the Included
allen wrench
_
1. Raise the Upright (10) to the vertical position. Slide the
1
Smell Upright Washer (79) and the Large Upright Washer
(25) onto the Upright Bolt (24). "13ghtenthe Upright Bolt into
the Upright with the Allen Wrench (53).
°o
2. Insert an Incline Leg (9) into one of the adjustment posts on
the Frame (37). Align one of the holes in the Incline Leg with
the hole in the adjustment post. Insert an Incline Pin (26)
through the adjustment post and the Incline Leg.
Assemble the other Incline Leg (9) in the same manner,
Make sure that both Incline Legs are at the same height.
Adjustment
Post
9
26
3. Attach the Hip Pad Bracket (72) to the Upright (10) with the
Pad Knob (52) and Knob Washer (36). (The three holes in
the Upright are for height adjustment. Select the height that
is the most comfortable.) Be sure that the Hip Pad (33) is
• oriented as shown.
3
33
72
36
4. Remove the paper backing from the Wrench Clip (50).
Attach the Wrench Clip to the underside of the Frame (37)
as shown, Slide the Allen Wrench (53) into the Wrench Clip,
37
5O
Because there are moving parts on the underside of the treadmill, it Is recommended that you cover the
floor beneath the treadmill. Your treadmill features a walking belt coated with PERFORMANT LUBE
TM,
a high-
performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or
the walking platform. They will deteriorate the walking belt and cause excessive wear.
4
Advertisement
