Assembly - Weslo CADENCE 60 CT User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re-
quires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of
the packing materials until assembly is completed. Do not remove the long wire inside the Right Handrail until
instructed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During
shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal
and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubri-
cant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys
wrench , and wire cutters
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-
aging parts, do not use power tools for assembly. Extra hardware may be included.
Handrail Washer
(30)–6
16mm Screw
(58)–6
Wheel Bolt (14)–2
1. Attach the six Base Pads (19) to the bottom of the Base
(71) with six Base Pad Screws (42). Note: The Base
Pads may be preassembled.
•Hazardous Voltage
•Risk of Electric Shock
•Unplug Treadmill before Assembly
/Disassembly.
All manuals and user guides at all-guides.com
and your own Phillips screwdriver
.
Handrail Star
Washer (60)–2
Console Screw
(70)–4
Frame Bolt (10)–2
6
Wheel Nut
Nut (17)–4
Base Pad
Screw (42)–6
Handrail Bolt (12)–4
1
71
42
19
42
42
19
19
, adjustable
(83)–2
42
19
42
19