Using The Control Panel; Running A Nozzle Check - Epson C120A User Manual

Using the Control Panel

1. Make sure the printer is turned on and not printing, and
that the B black and A color ink out lights are off.
2. Press the R cleaning button and hold it down for three
seconds.
Cleaning takes about one minute, during which the printer
makes some noise and the Ppower light flashes.
3. After the Ppower light stops flashing, print a page to test
the print quality and reset the cleaning cycle.
4. Run a Nozzle Check, examine the check pattern, and
respond as described below.

Running a Nozzle Check

1. Make sure the EPSON Stylus Scan is turned on but not
printing, and the B black and A color ink out lights are off.
2. Do one of the following:
W Click
Start
Right-click the
select
Properties.
M Open the File menu and choose
Then click the
3. Click the
Nozzle Check
4. Follow the instructions on the screen to run the nozzle
check.
, point to , then select
Settings
EPSON Stylus Scan 2000
Click the
Utility
Page Setup
button.
Utility
icon on the Utility menu.
Maintaining Your EPSON Stylus Scan
cleaning button
.
Printers
icon and
tab.
or
Print.
109