Solving Printing And Copying Problems - Epson C120A User Manual

Solving Problems
124
Connect the EPSON Stylus Scan directly to your computer's
built-in parallel port. Do not use a switch box. You can also
connect the EPSON Stylus Scan to your USB port
(Windows 98 only).
After you use your EPSON Stylus Scan with a parallel
connection, your Zip drive doesn't work when you
reconnect it to the same parallel port.
You may need to reinstall your Zip drive software. To avoid this
problem, you can disable the Zip drive in your Windows
Device Manager before you connect the EPSON Stylus Scan.
See your Windows Help for more information.
You're using the parallel port.
For maximum print speeds, enable ECP/DMA mode on your
computer's parallel port. See your computer documentation or
the manufacturer for instructions.
You're printing over a network.
See your electronic Reference Guide for computer configuration
instructions.

Solving Printing and Copying Problems

Only the P power light is on, but nothing prints.
Turn off the EPSON Stylus Scan and your computer.
Make sure the interface cable is connected securely. (Use a
fully shielded USB "AB" interface cable or an IEEE-1284
compliant parallel cable.)
Make sure there's no packing material inside the printer.