The Font On The Printout Is Different From That On The Screen; The Edges Of Texts And/Or Images Are Not Smooth (Only For Epson Pcl6 Printer Driver); Cannot Print From Citrix Presentation Server 4.5 (Only For Epson Pcl6 Printer Driver) - Epson AcuLaser M8000 Series User Manual

The font on the printout is different from that on the screen

Cause
The EPSON Screen Fonts are not installed.
The edges of texts and/or images are not smooth (only for Epson PCL6 printer
driver)
Cause
The resolution is set to 300 dpi.
The printer does not have sufficient memory.
The RITech is set to Off.
Cannot print from Citrix Presentation Server 4.5 (only for Epson PCL6 printer
driver)
Cause
The Enable advanced printing features setting is set
to On.
EPSON AcuLaser M8000 Series
What to do
The screen fonts must be installed on the computer that you are
using. Otherwise, the font that you select is substituted by some
other font for display on the screen.
What to do
Access the printer driver, click the Graphics tab, then select 600 dpi
as the resolution.
Increase the printer memory.
Access the printer driver, click the Graphics tab, then select On for
RITech from the drop-down list.
What to do
1. Right-click the printer's icon in the Printers folder, then select
Properties.
2. Click the Advanced tab, then clear the Enable advanced printing
features check box.
User's Guide
Troubleshooting 203