Epson AcuLaser M8000 Series User Manual page 73

Item
Toner Alert
LCD Contrast
*6*7
RAM Disk
*1
Available only when the corresponding option is installed.
*2
Available only when you use A4, A3, A5, B4, B5, LT, HLT, LGL, GLT, GLG, B, EXE, or F4 size paper.
*3
Available only for ESC/Page, ESC/P2, FX, or I239X mode.
*4
Not available in PS3.
*5
Not available in PCL.
*6
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again.
*7
Not available when a CompactFlash memory is installed.
Language
Specifies the language displayed on the LCD panel and that printed on the status sheet.
Time to Sleep
Specifies the length of time until the printer enters the sleep mode if there are no button operations
and no jobs to be printed.
Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data
is being received from an interface until the point of switching the interface. If the printer has a print
job when switching the interface, the printer prints the print job.
Paper Source
Specifies whether paper feeds into the printer from the MP tray, the standard paper cassette, or the
optional paper cassette unit.
If you select Auto, paper feeds from the paper source containing paper that matches your Paper Size
setting.
Out Bin
Specifies the output tray when the optional Stacker is installed.
Settings (default in bold)
Skip, Set
0 to 7 to 15
Off, Normal, Maximum
EPSON AcuLaser M8000 Series
Using the Control Panel
User's Guide
73