Using The Control Panel To Check The Printer - Epson 9600 Printer Manual

166 | Solving Problems
Error messages
Message Light
INK LOW Ink Out light(s)
flashing
INK OUT Ink Out light(s)
on
NOT ENOUGH Ink Out light(s)
INK on
NO INK Ink Out light(s)
CARTRIDGE on
WRONG INK Ink Out light(s)
CARTRIDGE on
INVALID INK
CARTRIDGE

Using the Control Panel to Check the Printer

The control panel includes various lights and a display to indicate the status
of the printer:
Display
When your ink or paper runs out or a problem occurs, a message appears on
the display, and the lights on the control panel come on or flash. The
following table lists the messages alphabetically and includes an explanation
and instructions for correcting the problem.
Explanation
Ink cartridge(s) are
nearly empty (printing
continues).
Ink cartridge(s) are
empty (printing stops).
Not enough ink is
available to finish
cleaning the print head.
Ink cartridge(s) not
installed.
You tried to install the
wrong ink cartridge.
6-166
Response
Make sure you have replacement cartridges
available. See page 141.
Replace the ink cartridge(s) indicated by
Ink Out light(s). See page 141 for instructions.
Replace the ink cartridge(s) indicated by
Ink Out light(s). See page 141 for instructions.
Install ink cartridges as indicated by the lights.
See page 141 for instructions.
If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.