Note
You can replace the ink
cartridges, cutter blade,
and maintenance tank
yourself. Other printer
parts need to replaced by
an authorized EPSON
service technician.
Note
Each asterisk (*)
represents about
20 percent.
Maintaining and Transporting the Printer
Viewing Status Information
To view printer status information instead of printing it, follow these steps:
1. Press the
SelecType
.
SETUP
2. Press d until you see
.
VERSION
3. Do one of the following:
To check the amount of ink left, press d until you see
•
then press r . The status of the first cartridge is displayed, using the
symbols described below. Continue pressing d to see the
E*****F
status of the remaining cartridges.
To check how much of the maintenance tank has been used, press d
•
until you see
displayed, using the
To check the status of other printer parts, press d until you see
•
SERVICE LIFE
displayed, using the
pressing d to see the status of the carriage motor, paper feed motor,
cutter blade, print head, and cleaning unit.
The status of the printer parts is indicated with these symbols:
= full (or full life remaining
E*****F
= 3/4 full (or 3/4 life remaining)
E**** F
= 1/2 full (or 1/2 life remaining)
E***
F
= 1/4 full (or 1/4 life remaining)
E**
F
= nearly empty (or service life near end)
E*
F
= less than 10% of ink (or service life) remaining
% F
4. Press
to exit the Printer Status menu.
Pause
5-131
button on the control panel. You see
PRINTER STATUS
, then press r . The status of the tank is
MAINT TANK
symbols described below.
E*****F
, then press r . The status of the carriage motor is
symbols described below. Continue
E*****F
)
PRINTER
, then press r . You see
INK LEFT
|
131
,