Drive Mode Selection - Canon EOS 10D Digital Instruction Manual

Drive Mode Selection

Three drive modes are provided:
Single frame: Only one shot is taken when you press the shutter button.
Continuous:
Continuous shots are taken while you hold down the shutter button fully.
Self-timer: The self-timer starts when you press the shutter button fully.
The image is captured 10 sec. later. (→p.77)
Image-Recording Quality
/ / / /
•
In the < > mode, the above figures will apply regardless of the C.Fn-08 setting.
•
Figures for the continuous shooting speed and maximum burst are based on Canon's
standard testing conditions (1/250 sec. and faster shutter speeds and ISO 100).
76
Continuous Shooting Speed
One Shot AF
/
Approx. 3 fps
Press the <
1
Select the drive mode.
2
•
While looking at the LCD panel, turn the <
to set the desired drive mode.
•
To return to shooting, press the shutter button
halfway.
Maximum Burst
AI Servo AF
Approx. 9 shots
> button.
: Single frame
: Continuous
: Self-timer
( )
> dial