Canon EOS 10D Digital Instruction Manual page 170

On-screen Messages
Message
Waste tank full
Printer error
Communication error An error occurred during communications. Turn off the printer and turn
Readjust trimming
Cannot print!
Could not print **
images
** images remaining
Cannot trim
Battery level is too
low.
170
To resume printing, press the BJ printer's Reset button. Have the
waste ink tank replaced by your dealer or service center (see the list
that came with the BJ printer) at your earliest convenience.
Turn off the printer and turn it back on. If the error is still displayed,
consult your nearest BJ printer service center (see the service center
list in the printer's manual).
it back on and start printing again.
The style does not match the trimming that was set.
The image was captured by another camera or in an incompatible
format. Or the image has been edited with a personal computer.
The image was captured by another camera or it has been edited with
a personal computer and printing was attempted according to the
DPOF setting for ** prints.
Since the printing with the DPOF setting was interrupted, ** prints still
remain to be printed.
The image was captured by another camera or in an incompatible
format. Or the image has been edited with a personal computer. Such
images cannot be trimmed.
Direct printing was not possible, because the camera battery level is
too low.
Description