Canon EOS 10D Digital Instruction Manual page 57

With the parameters already set, when you set the <
will start up and display "
parameter settings will be displayed. If [Set 1], [Set 2], or [Set 3] has been set, "
" ", or " " will be displayed. And if [Adobe RGB] (→p.58) has been set, "
will be displayed.
With C.Fn-01-2, you can set [Parameters] by pressing <
while looking at the LCD panel. (→p.146)
Select the parameter.
4
•
Turn the < > dial to select the parameter, then
press < >.
•
The parameter selection will change in the following
loop:
[Contrast]
[Color tone]
Set the parameter.
5
•
Turn the < > dial to set the parameter, then press
< >.
•
Each parameter can be set to one of five settings.
Return to the [Parameters] menu.
6
•
Press the <
Then press <
Select the Set No. that was set.
7
•
Turn the < > dial to select [Set 1], [Set 2], or [Set
3], then press <
After the setting is completed, the menu will
s
reappear.
•
To exit the menu and turn off the LCD monitor,
press the <
" on the LCD panel until it is ready for shooting. Then the
Setting Processing Parameters
[Sharpness]
[Saturation]
> button twice to return to step
>.
>.
> button.
> switch to < >, the camera
> and turning the <
3
1
.
",
"
> dial
57