Flash Exposure Compensation - Canon EOS 10D Digital Instruction Manual

Flash Exposure Compensation

Flash exposure compensation can be set in the same way as with exposure compensation. It
can be set up to + / – 2 stops in 1/2-stop increments. Flash exposure compensation works in
Creative Zone modes.
Decreased exposure
Increased exposure
•
The flash exposure compensation amount will remain in effect even after you turn the
< > switch to <
•
2
In step , turning the <
•
With C.Fn-06-1, you can set the camera to adjust exposure compensation in 1/3-stop
increments. (→p.147)
•
With C.Fn-14-1, you can also disable the Auto reduction of fill flash function.
(→p.150)
Press the <
1
Set the flash exposure compensation
2
amount.
•
Turn the <
dial to set the desired flash exposure compensation
amount at the viewfinder or LCD panel.
•
" " indicates increased flash exposure, and "
indicates decreased flash exposure.
Flash exposure level mark
•
To cancel the flash exposure compensation, set the
flash exposure compensation amount to < >.
Shoot.
3
>.
> dial sets the metering mode. (→p.74)
Using the Built-in Flash
> button.
> switch to < >, then turn the <
Standard flash
exposure index
Decreased
flash
exposure
( )
>
"
Increased
flash
exposure
101
7