Canon EOS 10D Digital Instruction Manual page 168

On-screen Messages
Message
Set Date/Time
Turn off the camera
after sensor cleaning
Battery level is too
low. Cannot clean
sensor
Folder number full
When the card photo printer for direct printing is connected to the camera, the camera's LCD
monitor may display any of the messages below.
Message
No paper
No ink
Incompatible paper
size
Incompatible ink size The wrong ink cassette has been loaded in the printer.
Ink cassette error
Paper and ink do not
match
Paper jam
Paper has been
changed
Recharge the printer
battery
Communication error Communication error occurred.
Readjust trimming
168
The date/time has not been set. Captured images will not have the
correct image capture date/time.
After cleaning the image sensor, turn the <
If there is insufficient battery power, the shutter may close during the
cleaning of the image sensor and the shutter curtains and image
sensor might be damaged. To prevent this, either use a fully-charged
battery or a household power outlet before starting to clean the image
sensor.
Keep a new CF card on hand. Since the 999Canon folder has been
created, the current CF card will soon become full.
(When "IMG_9999" is created, "
The paper cassette has not been inserted properly or there is no
paper in the cassette. Or there is a problem with the paper feed
operation.
There is no ink cassette or the ink cassette has no ink.
The wrong-size paper has been loaded in the printer. Printing is not
possible with paper of this size.
Printing is not possible with this ink cassette.
The paper and ink do not match each other.
The paper jammed during printing.
The paper size was changed prior to printing.
The printer's battery is exhausted.
Printing was attempted with a style different from the trimming setting.
Description
> switch to <
" will be displayed.)
Description
>.